Simple design wrought iron driveway entrance gates, with a choice of railing heads. Bar spacings for these wrought iron driveway gates are 100mm or less between bars. This makes them ideal for keeping pets in. Tall versions are ideal to provide security with out the cost of custom made to size gates. Each pair of driveway gates comes with a drop bolt on one gate and a latch on the other. As well as wall fixing plates and adjustable hinges. Can be supplied with steel posts if required.
10ft wide horsham design gates with posts
5ft and 6ft tall versions have a middle cross bar to increase strength the same as the tall single gate.
Choice of two railing head designs for the top decoration of these wrought iron driveway entrance gates.
Material specifications:for wrought iron driveway entrance gates
Frame from 30mm x 8mm flat (5ft and 6ft version use 30mm x 30mm hollow box section for hanging and closing stiles)
Upright bars from 12mm round.
All wrought iron driveway entrance gates are supplied with adjustable fittings which allows +/- 40mm to the size. Supplied with latch and drop bolt (will need to discuss which gate has drop bolt and which has latch as these are sided.
|Size||7ft wide||8ft wide||9ft wide||10ft wide||11ft wide||12ft wide|
Can be made to specific width if required this would add £75.
Can be supplied unpainted and usually works out about 10% cheaper
Posts can be supplied if required 80mm square for 3ft tall at £50 each and 100mm for 5ft and 6ft tall version at £90 each.
Email for your specific requirements