Crawley wall railings

wrought iron Garden wall railing with a simple scroll as decorative top, This is a very cost effective design. Ideal where there are multiple railings of different sizes as there is no design pattern to worry about..

Can be made as just a plain top without the scroll or with an alternative scroll option as below

Bar spacings on these wrought iron garden wall railings are around 100mm apart (This can be adjusted to suit your needs if required). Each wrought iron wall railing is made so that each gap is the same as the next gap. The gap from the brick pier to the first upright bar will be the same as the rest of the gaps. This ensures a high quality look to the railings.

The upright bars are also offered in a range of choices, 12mm round being the cheapest, 16mm round, and 20mm round. As well as 12mm square, 16mm square and 20mm square. The frame or horizontal bars are offered in 30mm x 8mm flat steel or 40mm x 8mm flat steel.

As mention these are made to measure, so as a guide we provide a price guidance for different sizes, although the size you require may not be listed it will be likely somewhere between to sizes. email me with your specific sizes and i can then mail back a price.

450mm high£95£110£125£140£155£170
600mm high£105£125£145£165£185£205
Price guidance for 30mm x 8mm flat using 12mm round as uprights

For heavier 16mm upright bars we recommend using 40mm x 8mm flat rather than 30mm flat, although 30mm can be used

450mm high£110£130£150£170£190£210
600mm high£120£150£180£210£240£270
Price guidance for 16mm square and 40mm x 8mm flat bar

Please note because these are made to size, it takes time to work out bar spacings between each upright. If there are two panels the same size, the second panel will be discounted by 5%. In short i can mark out the spacings from the first bar and transfer to the second. It saves me time and that means it saves you money.

All wrought iron garden wall railings are supplied with wall fittings, these allow an adjustment to size of around 10mm, ideal for when the wall isn’t quite level. Alternatively these railings can be fitted to steel posts where there are no brick piers, or on a long run where the brick piers are to far spaced apart to make in one wall railing panel.

All metal garden wall railings are supplied painted unless otherwise requested. Can be supplied in a wide variety of RAL colours, from Matt to eggshell to semi gloss to a full gloss.. The painting process is a slow one with each railing being acid etched, this excellent at rust protection but also provides an excellent key for the primer to stick to. Next the railing is primed with a high build primer, this helps smooth out some of the imperfections in the steel, then finally coated with the colour choice in a high quality top coat. Each painting process, etc, primer, top coat the railing is hung upside down and painted allowed to dry then flipped over the right way and repainted. This ensures a good coating over all parts of the railing. With allowing for drying time on each coat this takes around a week. But in my opinion paint is better than plastic powder coat, simply because it is far easier to repair should it become damaged.

Please Email us for more detail, happy to help with any additional information you require.

Scroll to Top